 |
 |
    |
|
|
|
The E-Case enclosure system is designed and manufactured in the United Kingdom by Lincoln Binns Ltd.
Need us to make some holes?
click here
Click here for complete price listing of E-Case electronic enclosures for UK and overseas customers
E-Case ASilver or black anodized aluminium extruded box section to take 55 x 40mm, 55 x 80mm or 55 x 120mm circuit boards. Ideal for small circuits, R.F. amplifiers etc. E-Case A electronic enclosure data sheet pdf
|
 |
| E-Case B Silver or black anodized extruded aluminium box section to take 100 x 80mm, 100 x 160mm or 100 x 220mm circuit boards. Slim profile for space conscious applications E-Case B electronic enclosure data sheet pdf Custom length aluminium extrusion data sheet pdf
|
 Click here for E-Case B image |
| E-Case C Silver or black anodized aluminium extruded box section to take 100 x 80mm, 100 x 160mm or 100 x 220mm circuit boards. E-Case C electronic enclosure data sheet pdf
|
 Click here for E-Case C image |
| E-Case
D Silver or black anodized aluminium extruded box section to take 160 x 80mm, 160 x 160mm or 160 x 220mm circuit boards. This box section has 5 screw ports for extra end plate support, if required. End plates are available with 4 or 5 holes. The 4 hole plate should be used if a bezel is required. E-Case D electronic enclosure data sheet pdf
|
 Click here for E-Case D image |
| E-Case
Bezels Silver or black plastic bezels to wrap round the edges of the end plates when fitted on the extruded housings. They conceal the screws and allow the enclosure to be used as a electronic instrument case. Click here for Bezel data sheet pdf
|
 Click here for bezel images |
| End
Plate Natural Aluminium end plate with screw holes and profile to suit the E-Case range of enclosures. Material is anodizing grade and has a removable plastic coating on one side to prevent unwanted scratches prior to application. Five shapes are available to suit the four E-Case profiles, E-Case D requires the 4 hole plate when used with a bezel. Click here for End plate data sheet pdf
|
 Click here for complete price listing Need to make some holes? click here |
| E-Case
Gaskets Oil resistant silicon sponge gaskets. Thickness 1.5mm. Sold as pairs complete with 8 optional washers to fit under the screw heads to increase rating from IP65 to IP66. Usually sold complete with removable centres. Colour varies (grey or white). Click here for gasket data sheet pdf
|
 Click here for gasket image |
| Linc Lug Extruded anodized aluminium mounting bracket for fixing E-Case housings to walls, panels, vehicle bulkheads etc. Linc-Lug slides into any external dovetail feature on any E-Case housing and is retained by the end plates. Lengths available are 40mm and 80mm. Also special 40mm lug with screw fixing allows location via wedging action at any point down the length of a dovetail slot. This is suitable for applications where the box is longer than the lug or lugs in the slot e.g. non-standard lengths. Sold as a pair in a plastic bag, it can be supplied to end users as an optional wall mounting kit. Linc-lug mounting bracket data sheet pdf
|
|
| Self
Tapping Screws No.4 x 3/8" posidriv pan head Plastite TMscrews to fit 2.7 mm diameter screw ports in E-Case range of boxes. They are used for mounting end plates on the boxes. Available in packs of 8 or 400 These screws have a true 3mm thread diameter. An ordinary No.4 screw is not a reliable substitute. |
||||||||||
|
E-Case electronic enclosure price listing | |||||||||
| Thread-forming
Screws M3 x 10 posidriv pan head TORXTM threadforming screws to roll their own M3 thread in the screw ports of E-Case range boxes. They are used for mounting end plates on the boxes. Available in packs of 8 or 400 |
||||||||||
|
E-Case electronic enclosure price listing | |||||||||
| Dink-Sink Silver anodized aluminium extruded heatsink suitable for surface mount power devices and through hole transistors up to TO 220 size. Can be used as a free standing air cooled heatsink mounted perpendicular to the circuit board. Alternatively, it can be mounted parallel to the board on top of surface mount integrated circuits or transistors. Ideally Dink-Sink should be used with extruded aluminium enclosures such as the E-Case which have slots for circuit board mounting. |
 |
||||||||
| Appropriate orientation of
the Dink-Sink allows it to slide into these slots. Application of heatsink compound
from a syringe into the roughly circular space between the Dink-Sink and the wall of the
enclosure provides a direct path for heat to escape to the outside of the enclosure. The
Dink-Sink is 22mm long.
A separate fitting kit and application note are available. click here for details |
|||||||||
|
|
||||||||
Click here for complete price listing of E-Case electronic enclosures for UK and overseas customers
Need to make some holes? click here
Picture Gallery
Product and data subject to
change without notice. User knows application and must determine fitness for purpose and
appropriateness of advice verbal or written
PlastiteTM is a trademark of Research Engineering and Manufacturing, Inc. TORXTM is a trademark of Textron Inc.
Lincoln Binns Ltd. Oakendene Estate,
Cowfold, West Sussex RH13 8AZ, UK
Tel: +44 (0) 1403 865486 - Fax: +44 (0) 1403 865487
