Aluminium electronic enclosures by Lincoln Binns UK: Aluminum enclosures & cases for electronic applications.

This is a gallery of pictures and typical applications of our electronic enclosure systems with links to customers. We hope you will get useful applications ideas here. If you wish to be included please send some pretty pictures and we will try to oblige!

EBS80 silver anodized electronics housing with front panel machined by Lincoln Binns

This is an EBS80 box in a customer's application. Box size 108 x 30 x 80mm

Below are two pictures of an EBB80 used in Geartronics Flatshift ECU.

Geartronics have developed a 'flat-shift' or 'shift without lift' system which enables a racing driver to make clutchless, full-throttle gear changes. www.geartronics.co.uk.

This box is the same as the one above except that it is black instead of silver.

The first picture shows it with optional Linc-lug mounting brackets LSB80.

EBB80 black anodised electronic case housing Geartronics flatshift ECU

black anodized electronic enclosure with machined back panel for Geartronics Flatshift ECU

Below is a picture of gold and blue anodized E-Case electronic enclosures.

Coloured enclosures are not standard - MOQ is 50pcs.

Blue and gold anodized electronic enclosures with circuit board

Below is a picture of an Arbel datalogger using an ECS80 case with a pair of LSS80 Linc-lugs.

The top of the enclosure has been machined so that a liquid crystal display is visible though the hole and a polycarbonate label with a clear panel prevents dust ingress. When using this arrangement there is often enough flexibility in the pcb to allow the display to pop up into the machined hole and be nearly flush with the surface. www.arbelelectronics.co.uk

GPRS data logger in ECS80 electronic case with polycarbonate label and LSS80 Linc lug mounting brackets

Below is our E-Case D machined then black anodized ready for duty as a camera head.

Machined aluminum electronic housing for video camera application

The plate below illustrates our punching and printing of full colour under anodizing.

Punched and printed under anodizing electrical plate

This black anodized plate has been lasered with white text.

black anodized machined laser printed E-Case D front plate

LEN Ltd. specialize in 3G and HDTV Signal Distribution products, video and RF filters from baseband to over 1000 MHz, and have a complete

range of Ceramic filter designs including bandpass, bandstop, notch and mulitplexers www.len.co.uk

LEN's customers need innovative filters fast, and they know we wont let them down with their urgent housing requirements.

1U 19" rack-front. We made a batch of ten for LEN Ltd.

19" rack front printed and black anodized

This silver anodized enclosure has been lasered with white text. The result is very subtle and gives an expensive look.

Automotive electronic housing

This tiger shows what we can do with a laser.

Aluminium extruded housing with laser etch

This plastic panel looks exactly like polished metal. We can cut and engrave it at the same time. We can design and make fascias of any size very quickly.

laser cut and etched plastic fascia for electronic prototype

colour printed anodized electronics case

Below are two enclosures which illustrate the use of bezels

Bluetooth automotive application with bezels

Power supply enclosure with bezels

Lincoln Binns Ltd. Oakendene Estate, Cowfold, West Sussex RH13 8AZ, UK
Tel: +44 (0) 1403 865486 - Fax: +44 (0) 1403 865487