 |
 |
    |
|
|
|
This range is now phased out. The E-Case range replaces it.
~~~~~~~~~~~~~OBSOLETE~~~~~~~~~~~~~~
Why keep this page then? So people searching for Linc-Ace can find it and link into E-Case which is compatible.
Click
here for complete price listing for Linc-Ace product range
Linc-Ace AAluminium extruded box section to take 55 x 40mm, 55x 80mm or 55 x 120mm circuit boards. Ideal for small circuits, R.F. amplifiers etc. Available black anodized or natural.
|
 Click here for detailed image |
| Linc-Ace B Aluminium extruded box section to take 100 x 80mm, 100 x 160mm or 100 x 220mm circuit boards. Slim profile for space conscious applications. Available black anodized or natural.
|
 Click here for detailed image |
| Linc-Ace C Aluminium extruded box section to take 100 x 80mm, 100 x 160mm or 100 x 220mm circuit boards. Up to 30mm above the circuit board gives room for transformers etc. Available black anodized or natural.
|
 Click here for detailed image |
| Linc-Lug Extruded aluminium mounting bracket for fixing Linc-Ace housings to walls, panels, vehicle bulkheads etc. Linc-Lug slides into any external dovetail feature on any Linc-Ace housing and is retained by the end plates. The Linc-Lug features two V-shaped notches as a drill start for extra holes Lengths available are 40mm and 80mm. Finish is strip silver anodized (like E-Case range) or black anodized.
|
 Click here for detailed image |
| End Plate Natural or black anodized aluminium end plate thickness 1.5 mm with four screw holes and profile to suit the Linc-Ace range of enclosures. Natural end plates are anodizing grade and have a removable plastic coating on one side to prevent unwanted scratches prior to application. Three sizes are available to suit the three Linc-Ace profiles.
|
 Click here for detailed image |
| Linc-Sink Extruded aluminium heatsink bracket for mounting power semiconductors, including those with TO 3, TO 218 and TO 220 cases. Linc-Sink slides into the special receiving slots on the inside of every Linc-Ace housing. It can be both circuit board mounted and in contact with the Linc-Ace housing if correctly mounted (see isometric drawing). Lengths available: 40mm and 20mm. (20mm is not suitable for TO 3.) Comes complete with fitting kit containing washers and screws.
|
 Click here for detailed image |
| Rubber Foot Black, extruded E.P.D.M. rubber foot. Slides into any external dovetail feature on any Linc-Ace enclosure and is retained when the end plates are attached. Hardness of 55 shore (average) gives good grip. Available by the metre.
|
 Click here for detailed image |
| Gaskets Oil resistant nitrile bonded cork gaskets to BS F66 and ASTM F104. Coated one side with pressure sensitive adhesive. Thickness 1mm. Sold singly.
|
 Click here for detailed image |
| Screws No.4 x 3/8" posidriv pan head plastite screws to fit 2.7 mm diameter screw ports in Linc-Ace range of boxes. They are used for mounting end plates on the boxes (four per end plate). Available in packs of 8 or 400. |
||||||||||
|
||||||||||
Product and data subject to change without notice. User knows application and must determine fitness for purpose and appropriateness of advice verbal or written. See terms and conditions of sale.
Lincoln
Binns Ltd. Oakendene Estate, Cowfold, West Sussex RH13 8AZ, UK
Tel: +44 (0) 1403 865486 - Fax: +44 (0) 1403 865487