Clip-on Bracket Lincoln Binns has introduced a plastic clip-on mounting bracket for the E-Case enclosure range. It is an alternative to the MTS40 type metal bracket. The main benefit of the clip-on bracket is that it can be retro-fitted by the end user. The original metal bracket was retained by end plates and therefore fitted[…]
The E-Case Range is made up of numerous aluminium enclosures all designed and manufactured by Lincoln Binns.
E-Case C is one of our aluminium electronic enclosures E-Case C extruded electronic enclosure is designed for Eurocard width circuit boards. It is a box section aluminium electronic enclosure to take a 100mm wide board with board lengths 80mm, 160mm or 220mm. It is also available in non-standard lengths. Standard colours are silver anodised or[…]
The E-Case end plates are available in three finishes: black anodised, silver (clear) anodised and natural. Natural End Plates are anodising grade and have a removable plastic coating on one side to prevent unwanted scratches prior to application. Silver anodised End Plates are intended as partners for the E-Case (silver) electronic enclosures and black anodised[…]
E-Case Bezel Cosmetic end plate surrounds made of ABS plastic that are available in four sizes to suit the four extrusion profiles. The four end-plate mounting screws pass through the bezel, through the end-plate and into the extrusion. The screw heads are concealed by inserts which closely match the bezel. This gives a much-improved cosmetic[…]
E-Case Gaskets Gaskets come as a set suitable for waterproofing one aluminium enclosure. A set comprises two white silicon foam gaskets and a number of polythene washers. The washers are optionally fitted under the heads of the screws and raise the rating of the gasket set from IP65 to IP66. Application Information: The E-Case aluminium[…]
Extruded Mounting Bracket from Lincoln Binns Ltd Aluminium extruded mounting bracket for fixing E-Case housings to walls, panels, vehicle bulkheads etc. Linc-Lug slides into any external dovetail feature on E-Case housings and is retained by the end plates. The silver lugs are strip silver anodised and are used with the silver E-Case enclosures that are[…]
Self-Tapping Screw and Thread-Forming Screws Are Available For The E-Case A self-tapping screw is a screw that can tap its own hole as it’s driven into the aluminium of our enclosures. A regular machine screw cannot tap its own hole. The self-tapping ability is often created by cutting a gap in the continuity of the[…]