Data For Our Uniobox 66 Aluminium Electronic Enclosure
Silver or black anodized combination extruded and sheet aluminium box to take circuit boards of width 100mm, 128mm, 160mm and 220mm and length 80mm, 120mm, 160mm and 220mm.
The box comprises a pair of extruded aluminium sides of height 66mm which accept an aluminium top and bottom plate to form a box section. Front and rear plates are fixed into the side extrusions using self tapping screws to form the enclosure and retain the top and bottom plates. The maximum height of components on a board mounted in the bottom slot is 45mm.
The box features plenty of height relative to its width and is suitable for higher components like transformers, or will have space for pcb mounted daughter boards or additional boards mounted in the extra slots. The outside of the box features a decorative ribbed pattern which is a UK registered design.
Uniobox 66 Envelope Drawing
UnioBox 66 Order Codes:
|PCB size mm||Box Width||Extrusion Length||Order Code Silver|
|100 x 80||104||80||U66S-104×080|
|100 x 120||104||120||U66S-104×120|
|100 x 160||104||160||U66S-104×160|
|100 x 220||104||220||U66S-104×220|
|128 x 80||132||80||U66S-132×080|
|128 x 120||132||120||U66S-132×120|
|128 x 160||132||160||U66S-132×160|
|128 x 220||132||220||U66S-132×220|
|160 x 80||164||80||U66S-164×080|
|160 x 120||164||120||U66S-164×120|
|160 x 160||164||160||U66S-164×160|
|160 x 220||164||220||U66S-164×220|
|220 x 80||224||80||U66S-224×080|
|220 x 120||224||120||U66S-224×120|
|220 x 160||224||160||U66S-224×160|
Box comprises (all items silver):
2 x End plates, Top Plate and Bottom Plate, 2 x UnioBox extrusion, 8 x screws.
Screws – 4.2mm x 13 TORX pan head self-tapping screws type AB:
Natural aluminium carrier plates the same size as standard circuit boards to slide in the enclosures and be adapted to carry non-standard circuit boards and other fittings. These are simple rectangles of aluminium sheet 1.5mm thick for internal use (i.e. surface finish may not be perfect). Custom carrier plates can also be supplied.
|Carrier Size mm||Order Code|
|100 x 80||CN-100080|
|100 x 120||CN-100120|
|100 x 160||CN-100160|
|100 x 220||CN-100220|
|128 x 80||CN-128080|
|128 x 120||CN-128120|
|128 x 160||CN-128160|
|128 x 220||CN-128220|
|160 x 80||CN-160080|
|160 x 120||CN-160120|
|160 x 160||CN-160160|
|160 x 220||CN-160220|
|220 x 80||CN-220080|
|220 x 120||CN-220120|
CN-160220 can be used lengthways or sideways
Universal Uniobox mounting lug length 50mm in black ABS plastic. Order Code: UBL50. Two are required (one each side) for the 80mm long enclosure and either two or four for longer enclosures as desired. The lug fits round the curve of the UnioBox extrusion and is fixed into the decorative fin feature by two concealed self-tapping screws. It weighs 8g.
TORX™ is a trademark of Textron Inc. Product and data subject to change without notice.
To download this page in a pdf format, please click here.