Custom Electronics Box – Uniobox 66
Our custom electronics box Uniobox 66 is made of extruded side pieces with top and bottom made of sheet aluminum. It comes in standard sizes, but it is fairly simple to punch the sheet aluminum to non-standard widths and lengths. We can also make the front panels to match and we can make connector holes at the same time. The custom electronic enclosure end plates are fixed via self-tapping screws into screw ports in the side extrusions. It comes in a standard 66mm height.
We also developed a swivel bracket for the Uniobox which clamps into the scallops on the sides. This allows the box to be mounted in, for example, the bridge house of a boat and the angle adjusted to improve viewing of a display on the front. The box can be removed from the clamp when not required. This would allow removal at night to prevent theft, for example. At the moment, this is a custom design depending on the size of the box. Picture to follow…
UnioBox is available in silver or black anodized finish, and the side extrusions are available on their own (sold in pairs).
DOWNLOADS & PRODUCT DETAILS
All of our custom extruded aluminum enclosures are made of extruded side pieces with top and bottom plates made of sheet aluminum. They are available in standard sizes but can be fully customised in width and height. End plates can be made according the width of the final enclosure. They are available in 4 different heights and can be mounted to 19″ panels to create 19″ rack enclosures. Lincoln Binns can design and manufacture a custom U-Case to fit your PCB needs or we can manufacture a design from a high quality PDF or Vector Graphic. Contact us to find out more about our customising services or to place an order.
U-Case 1 & Uniobox Range
|U-Case 1||Uniobox 2|